PRODUCTS
Plastic Woven Mats Jacquard Making Machine 24” 36” 38” 40” 42” 48”
- Machine rotation is faster, So Productivity is higher ; Working Speed is adjustable
- Weft PP Pipes are automatically fed by feed roll
- In a jacquard system, PP pipes are selected by design cards, which makes it possible to weave variously designed PP
mats. The operator can easily change the design by replacing the design card. - One worker can operate 4 to 6 jacquard weaving machines
- Models equipped with left and right 2-Color Feeders are available for weaving2 to 4 colored PP mats.
- Automatic Thickness Adjustable Device, This device is for feeding warp thread automatically from the warp beam, Mat
length (thickness) is freely adjustable. - Feeder for weft PP pipe, Feeder capacity is 1.5 times larger than before, which makes it possible to place and stock
more PP pipes in the hopper and also makes it very easy to insert pp pipes into the feeder. - Misfeeding preventing mechanism,(Sequence controller is used) in the event one weft pp pipe is not fed to the machine ,
this mechanism automatically prevents and removes the next coming pp pipe. - Upper guide pipe for warp thread, Upper and lower guide pipes are made of high quality stainless steel, thus
eliminating the problem of rust. - Cam has been especially hardened to endure high speed rotation.
- The feed roll rubber is made of hard urethane of sufficient durability. A special high quality bearing is
used for the under roll.
| Model | ATC900 36" | ATC1000 40" | ATC1200 48" | ATC900B 36" | ATC1000B 40" | ATC1200B 48" |
| Actual PP Mat Width |
900MM | 1000MM | 1200MM | 900MM | 1000MM | 1200MM |
| 35.45" | 39.35" | 47.25" | 35.45" | 39.35" | 47.25" | |
| Main Weaving Motor | Single Weaving Motor,Three Phase 380V 50HZ 0.55kw, CE standard | |||||
| Main Spindle RPM | 100-130RPM | |||||
| Brake Mode | Mechanical Brake For Yard Beam and Main Spindle | |||||
| Tube Imichi | 2PCS Tube Imichi | 1PC Tube Imichi | ||||
| PP Tube Length | 970mm | 1070mm | 1260mm | 970mm | 1070mm | 1260mm |
| PP tube Feeding Motor |
Double Motors on Both Side ,Single Feeding Motor, Three Phase 380V 50HZ Thress Phase 0.18KW , CE Standard |
Single Motor on Left or Right, Single Feeding Motor, Three Phase380V 50HZ Thress Phase 0.18KW, CE Standard |
||||
| PP Tube Feeding Motor RPM |
1400RPM 180w Motor , and PP Tube feeding speed about 2800-3200 times per minute | |||||
| Switch Assembly | CE Stanards High Safety Switches | |||||
| P.P. Tube Holder | 2PCS on Left and 2PCS on Right | 4PCS on Left or Right | ||||
| Holder Place | 2PCS on Left and 2PCS on Right | 4PCS on either side | ||||
| PP Tube Feeder | Left 2PCS Feeding inlets and Right 2PCS Feeding inlets | 4PCS Feeding Inlets on Left or Right | ||||
| MAX Tube Colors | 4 Colors | |||||
| Warp Yard Thread Space |
4.18 or 4.83MM | 4.83MM | 4.18 or 4.83MM | 4.83mm | ||
| Needles QTY | 4.18mm 279pcs Needles；4.83mm 250pcs Needles |
4.18mm 303pcs Needles；4.83mm 271pcs Needles |
312pcs Needles | 4.18mm 279pcs Needles；4.83mm 250pcs Needles |
4.18mm 303pcs Needles；4.83mm 271pcs Needles |
312pcs Needles |
| Yard Sensor Auto Stopper |
No | |||||
| Yard Warper Beam | 1 PC or 2PCS Yard Beams | |||||
| Jacquard Loom | Single Jacquard | |||||
| Design Card Specification |
218mmX68.5MM With 12pcs * 32 rows Holes | 193*68.5mm with 16 pcs Hole*39rows | ||||
| Design Card Qty | Based on Mat Design | |||||
| Productivity | 10-12 Meter Length per hour | |||||
| Machine Net Weight | 1100KGS | 1200KGS | 1300KGS | 1100KGS | 1200KGS | 1300KGS |
| PACKAGE SIZE | 2.1*1.1*2.25M | 2.2*1.1*2.25M | 2.5*1.1*2.25M | 2.1*1.1*2.25M | 2.2*1.1*2.25M | 2.5*1.1*2.25M |
| NOTE: | The mat come out from the back of machines . 24" 600mm Seated Mat Machine is avaliable | |||||
